ExcELIN2 Class
Detailed excitation system ELIN (VATECH). This model represents an all-static excitation system. A PI voltage controller establishes a desired field current set point for a proportional current controller. The integrator of the PI controller has a follow-up input to match its signal to the present field current. Power system stabilizer models used in conjunction with this excitation system model: PssELIN2, PssIEEE2B, Pss2B.
Diagram
Свойства (27)
| ID | Тип | Описание | Количество |
|---|---|---|---|
| k1 | PU | Voltage regulator input gain (<i>K1</i>). Typical value = 0. | 1..1 |
| k1ec | PU | Voltage regulator input limit (<i>K1ec</i>). Typical value = 2. | 1..1 |
| kd1 | PU | Voltage controller derivative gain (<i>Kd1</i>). Typical value = 34,5. | 1..1 |
| tb1 | Seconds | Voltage controller derivative washout time constant (<i>Tb1</i>) (>= 0). Typical value = 12,45. | 1..1 |
| pid1max | PU | Controller follow up gain (<i>PID1max</i>). Typical value = 2. | 1..1 |
| ti1 | PU | Controller follow up deadband (<i>Ti1</i>). Typical value = 0. | 1..1 |
| iefmax2 | PU | Minimum open circuit excitation voltage (<i>I</i><i><sub>efmax2</sub></i>). Typical value = -5. | 1..1 |
| k2 | PU | Gain (<i>K2</i>). Typical value = 5. | 1..1 |
| ketb | PU | Gain (<i>Ketb</i>). Typical value = 0,06. | 1..1 |
| upmax | PU | Limiter (<i>Upmax</i>) (> ExcELIN2.upmin). Typical value = 3. | 1..1 |
| upmin | PU | Limiter (<i>Upmin</i>) (< ExcELIN2.upmax). Typical value = 0. | 1..1 |
| te | Seconds | Time constant (<i>Te</i>) (>= 0). Typical value = 0. | 1..1 |
| xp | PU | Excitation transformer effective reactance (<i>Xp</i>). Typical value = 1. | 1..1 |
| te2 | Seconds | Time Constant (<i>T</i><i><sub>e2</sub></i>) (>= 0). Typical value = 1. | 1..1 |
| ke2 | PU | Gain (<i>Ke2</i>). Typical value = 0,1. | 1..1 |
| ve1 | PU | Exciter alternator output voltages back of commutating reactance at which saturation is defined (<i>Ve</i><i><sub>1</sub></i>) (> 0). Typical value = 3. | 1..1 |
| seve1 | PU | Exciter saturation function value at the corresponding exciter voltage, <i>Ve</i><i><sub>1</sub></i>, back of commutating reactance (<i>Se[Ve</i><i><sub>1</sub></i><i>]</i>) (>= 0). Typical value = 0. | 1..1 |
| ve2 | PU | Exciter alternator output voltages back of commutating reactance at which saturation is defined (<i>Ve</i><i><sub>2</sub></i>) (> 0). Typical value = 0. | 1..1 |
| seve2 | PU | Exciter saturation function value at the corresponding exciter voltage, <i>Ve</i><i><sub>2</sub></i>, back of commutating reactance (<i>Se[Ve</i><i><sub>2</sub></i><i>]</i>) (>= 0). Typical value = 1. | 1..1 |
| tr4 | Seconds | Time constant (<i>T</i><i><sub>r4</sub></i>) (>= 0). Typical value = 1. | 1..1 |
| k3 | PU | Gain (<i>K3</i>). Typical value = 0,1. | 1..1 |
| ti3 | Seconds | Time constant (<i>T</i><i><sub>i3</sub></i>) (>= 0). Typical value = 3. | 1..1 |
| k4 | PU | Gain (<i>K4</i>). Typical value = 0. | 1..1 |
| ti4 | Seconds | Time constant (<i>T</i><i><sub>i4</sub></i>) (>= 0). Typical value = 0. | 1..1 |
| iefmax | PU | Limiter (<i>I</i><i><sub>efmax</sub></i>) (> ExcELIN2.iefmin). Typical value = 1. | 1..1 |
| iefmin | PU | Limiter (<i>I</i><i><sub>efmin</sub></i>) (< ExcELIN2.iefmax). Typical value = 1. | 1..1 |
| efdbas | PU | Gain (<i>Efdbas</i>). Typical value = 0,1. | 1..1 |
Информация о классе
- ID
cim:ExcELIN2- Тип
- Class
- Наследует
- cim:ExcitationSystemDynamics
- Свойств
- 27