Terminal Class
An AC electrical connection point to a piece of conducting equipment. Terminals are connected at physical connection points called connectivity nodes.
Diagram
Свойства (13)
| ID | Тип | Описание | Количество |
|---|---|---|---|
| TopologicalNode | TopologicalNode | The topological node associated with the terminal. This can be used as an alternative to the connectivity node path to topological node, thus making it unnecessary to model connectivity nodes in some cases. Note that the if connectivity nodes are in the model, this association would probably not be used as an input specification. | 0..1 |
| HasSecondMutualCoupling | MutualCoupling | Mutual couplings with the branch associated as the first branch. | 0..n |
| HasFirstMutualCoupling | MutualCoupling | Mutual couplings associated with the branch as the first branch. | 0..n |
| ConductingEquipment | ConductingEquipment | The conducting equipment of the terminal. Conducting equipment have terminals that may be connected to other conducting equipment terminals via connectivity nodes or topological nodes. | 1 |
| ConnectivityNode | ConnectivityNode | The connectivity node to which this terminal connects with zero impedance. | 0..1 |
| SvPowerFlow | SvPowerFlow | The power flow state variable associated with the terminal. | 0..1 |
| RemoteInputSignal | RemoteInputSignal | Input signal coming from this terminal. | 0..n |
| ConverterDCSides | ACDCConverter | All converters' DC sides linked to this point of common coupling terminal. | 0..n |
| AuxiliaryEquipment | AuxiliaryEquipment | The auxiliary equipment connected to the terminal. | 0..n |
| RegulatingControl | RegulatingControl | The controls regulating this terminal. | 0..n |
| phases | PhaseCode | Represents the normal network phasing condition. If the attribute is missing, three phases (ABC) shall be assumed, except for terminals of grounding classes (specializations of EarthFaultCompensator, GroundDisconnector, and Ground) which will be assumed to be N. Therefore, phase code ABCN is explicitly declared when needed, e.g. for star point grounding equipment. The phase code on terminals connecting same ConnectivityNode or same TopologicalNode as well as for equipment between two terminals shall be consistent. | 0..1 |
| TransformerEnd | TransformerEnd | All transformer ends connected at this terminal. | 0..n |
| TieFlow | TieFlow | The control area tie flows to which this terminal associates. | 0..2 |
Ссылки (12)
| Класс | Свойство | Описание |
|---|---|---|
| cim:TopologicalNode | cim:Terminal |
The terminals associated with the topological node. This can be used as an alternative to the connectivity node path to terminal, thus making it unnecessary to model connectivity nodes in some cases. Note that if connectivity nodes are in the model, this association would probably not be used as an input specification. |
| cim:ConnectivityNode | cim:Terminals |
Terminals interconnected with zero impedance at a this connectivity node. |
| cim:ConductingEquipment | cim:Terminals |
Conducting equipment have terminals that may be connected to other conducting equipment terminals via connectivity nodes or topological nodes. |
| cim:MutualCoupling | cim:Second_Terminal |
The starting terminal for the calculation of distances along the second branch of the mutual coupling. |
| cim:MutualCoupling | cim:First_Terminal |
The starting terminal for the calculation of distances along the first branch of the mutual coupling. Normally MutualCoupling would only be used for terminals of AC line segments. The first and second terminals of a mutual coupling should point to different AC line segments. |
| cim:TransformerEnd | cim:Terminal |
Terminal of the power transformer to which this transformer end belongs. |
| cim:ACDCConverter | cim:PccTerminal |
Point of common coupling terminal for this converter DC side. It is typically the terminal on the power transformer (or switch) closest to the AC network. |
| cim:SvPowerFlow | cim:Terminal |
The terminal associated with the power flow state variable. |
| cim:RemoteInputSignal | cim:Terminal |
Remote terminal with which this input signal is associated. |
| cim:AuxiliaryEquipment | cim:Terminal |
The Terminal at the equipment where the AuxiliaryEquipment is attached. |
| cim:TieFlow | cim:Terminal |
The terminal to which this tie flow belongs. |
| cim:RegulatingControl | cim:Terminal |
The terminal associated with this regulating control. The terminal is associated instead of a node, since the terminal could connect into either a topological node or a connectivity node. Sometimes it is useful to model regulation at a terminal of a bus bar object. |
Информация о классе
- ID
cim:Terminal- Тип
- Class
- Наследует
- cim:ACDCTerminal
- Свойств
- 13