GovSteamIEEE1 Class
IEEE steam turbine governor model. Ref<font color="#0f0f0f">erence: IEEE Transactions on Power Apparatus and Systems, November/December 1973, Volume PAS-92, Number 6, <i><u>Dynamic Models for Steam and Hydro Turbines in Power System Studies</u></i>, page 1904.</font>
Diagram
Свойства (21)
| ID | Тип | Описание | Количество |
|---|---|---|---|
| mwbase | ActivePower | Base for power values (<i>MWbase</i>) (> 0)<i>. </i>Unit = MW. | 1..1 |
| k | PU | Governor gain (reciprocal of droop) (<i>K</i>) (> 0). Typical value = 25. | 1..1 |
| t1 | Seconds | Governor lag time constant (<i>T1</i>) (>= 0). Typical value = 0. | 1..1 |
| t2 | Seconds | Governor lead time constant (<i>T2</i>) (>= 0). Typical value = 0. | 1..1 |
| t3 | Seconds | Valve positioner time constant (<i>T3</i>) (> 0). Typical value = 0,1. | 1..1 |
| uo | Float | Maximum valve opening velocity (<i>Uo</i>) (> 0). Unit = PU / s. Typical value = 1. | 1..1 |
| uc | Float | Maximum valve closing velocity (<i>Uc</i>) (< 0). Unit = PU / s. Typical value = -10. | 1..1 |
| pmax | PU | Maximum valve opening (<i>Pmax</i>) (> GovSteamIEEE1.pmin). Typical value = 1. | 1..1 |
| pmin | PU | Minimum valve opening (<i>Pmin</i>) (>= 0 and < GovSteamIEEE1.pmax). Typical value = 0. | 1..1 |
| t4 | Seconds | Inlet piping/steam bowl time constant (<i>T4</i>) (>= 0). Typical value = 0,3. | 1..1 |
| k1 | Float | Fraction of HP shaft power after first boiler pass (<i>K1</i>). Typical value = 0,2. | 1..1 |
| k2 | Float | Fraction of LP shaft power after first boiler pass (<i>K2</i>). Typical value = 0. | 1..1 |
| t5 | Seconds | Time constant of second boiler pass (<i>T5</i>) (>= 0). Typical value = 5. | 1..1 |
| k3 | Float | Fraction of HP shaft power after second boiler pass (<i>K3</i>). Typical value = 0,3. | 1..1 |
| k4 | Float | Fraction of LP shaft power after second boiler pass (<i>K4</i>). Typical value = 0. | 1..1 |
| t6 | Seconds | Time constant of third boiler pass (<i>T6</i>) (>= 0). Typical value = 0,5. | 1..1 |
| k5 | Float | Fraction of HP shaft power after third boiler pass (<i>K5</i>). Typical value = 0,5. | 1..1 |
| k6 | Float | Fraction of LP shaft power after third boiler pass (<i>K6</i>). Typical value = 0. | 1..1 |
| t7 | Seconds | Time constant of fourth boiler pass (<i>T7</i>) (>= 0). Typical value = 0. | 1..1 |
| k7 | Float | Fraction of HP shaft power after fourth boiler pass (<i>K7</i>). Typical value = 0. | 1..1 |
| k8 | Float | Fraction of LP shaft power after fourth boiler pass (<i>K8</i>). Typical value = 0. | 1..1 |
Информация о классе
- ID
cim:GovSteamIEEE1- Тип
- Class
- Наследует
- cim:TurbineGovernorDynamics
- Свойств
- 21