VsConverter Class
DC side of the voltage source converter (VSC).
Diagram
Свойства (15)
| ID | Тип | Описание | Количество |
|---|---|---|---|
| delta | AngleDegrees | Angle between VsConverter.uv and ACDCConverter.uc. It is converter’s state variable used in power flow. The attribute shall be a positive value or zero. | 1..1 |
| uv | Voltage | Line-to-line voltage on the valve side of the converter transformer. It is converter’s state variable, result from power flow. The attribute shall be a positive value. | 1..1 |
| VSCDynamics | VSCDynamics | Voltage source converter dynamics model used to describe dynamic behaviour of this converter. | 0..1 |
| CapabilityCurve | VsCapabilityCurve | Capability curve of this converter. | 0..1 |
| maxModulationIndex | Float | The maximum quotient between the AC converter voltage (Uc) and DC voltage (Ud). A factor typically less than 1. It is converter’s configuration data used in power flow. | 0..1 |
| droop | PU | Droop constant. The pu value is obtained as D [kV/MW] x Sb / Ubdc. The attribute shall be a positive value. | 0..1 |
| droopCompensation | Resistance | Compensation constant. Used to compensate for voltage drop when controlling voltage at a distant bus. The attribute shall be a positive value. | 0..1 |
| pPccControl | VsPpccControlKind | Kind of control of real power and/or DC voltage. | 1..1 |
| qPccControl | VsQpccControlKind | Kind of reactive power control. | 1..1 |
| qShare | PerCent | Reactive power sharing factor among parallel converters on Uac control. The attribute shall be a positive value or zero. | 0..1 |
| targetQpcc | ReactivePower | Reactive power injection target in AC grid, at point of common coupling. Load sign convention is used, i.e. positive sign means flow out from a node. | 0..1 |
| targetUpcc | Voltage | Voltage target in AC grid, at point of common coupling. The attribute shall be a positive value. | 0..1 |
| targetPowerFactorPcc | Float | Power factor target at the AC side, at point of common coupling. The attribute shall be a positive value. | 0..1 |
| targetPhasePcc | AngleDegrees | Phase target at AC side, at point of common coupling. The attribute shall be a positive value. | 0..1 |
| targetPWMfactor | Float | Magnitude of pulse-modulation factor. The attribute shall be a positive value. | 0..1 |
Ссылки (2)
| Класс | Свойство | Описание |
|---|---|---|
| cim:VSCDynamics | cim:VsConverter |
Voltage source converter to which voltage source converter dynamics model applies. |
| cim:VsCapabilityCurve | cim:VsConverterDCSides |
All converters with this capability curve. |
Информация о классе
- ID
cim:VsConverter- Тип
- Class
- Наследует
- cim:ACDCConverter
- Свойств
- 15